# AS5047P-ATSM: drawn model against the datasheet

Model: KiCad's official 3D library, `TSSOP-14_4.4x5mm_P0.65mm.step` (KiCad 10.0.5 `3dmodels`, made by the kicad-packages3D generator), licensed CC BY-SA 4.0 with KiCad's design exception. It is not the manufacturer's model: no manufacturer STEP can be redistributed (see ../provenance.json).
Datasheet: AS5047P datasheet v2-00, PDF p.33 Figure 40. Measured with the shared step2glb service's /step-meta (every face's bounding box).

| Dimension | Datasheet min | Datasheet max | Model | Result |
|---|---|---|---|---|
| Overall span | 6.4 | 6.4 | 6.4 | pass |
| Body length (along the rows) | 4.9 | 5.1 | 5.0 | pass |
| Overall height | - | 1.2 | 1.0 | pass |
| Standoff | 0.05 | 0.15 | 0.1 | pass |
| Lead pitch | 0.65 | 0.65 | 0.65 | pass |
| Leads | 14 | 14 | 14 | pass |

Body top face (drafted, so smaller than the body at its parting line): 4.141 x 4.741 mm. The body width across the rows is shown in the overlay against the datasheet's min and max boxes.

![True-scale overlay against the datasheet limits](overlay.png)

Marked: `AS5047P-ATSM-etched.step`, adom-aiflow-etch check PASS (flat Adom.LaserEtch layer, along the pin rows, upright, pin 1 lower left).