# OPA2365AIDR: drawn model against the datasheet

Model: KiCad's official 3D library, `SOIC-8_3.9x4.9mm_P1.27mm.step` (KiCad 10.0.5 `3dmodels`, made by the kicad-packages3D generator), licensed CC BY-SA 4.0 with KiCad's design exception. It is not the manufacturer's model: no manufacturer STEP can be redistributed (see ../provenance.json).
Datasheet: TI SBOS365G, p.33 D0008A. Measured with the shared step2glb service's /step-meta (every face's bounding box).

| Dimension | Datasheet min | Datasheet max | Model | Result |
|---|---|---|---|---|
| Overall span | 5.8 | 6.19 | 6.0 | pass |
| Body length (along the rows) | 4.81 | 5.0 | 4.9 | pass |
| Overall height | - | 1.75 | 1.75 | pass |
| Standoff | 0.1 | 0.25 | 0.1 | pass |
| Lead pitch | 1.27 | 1.27 | 1.27 | pass |
| Leads | 8 | 8 | 8 | pass |

Body top face (drafted, so smaller than the body at its parting line): 3.52 x 4.52 mm. The body width across the rows is shown in the overlay against the datasheet's min and max boxes.

![True-scale overlay against the datasheet limits](overlay.png)

Marked: `OPA2365AIDR-etched.step`, adom-aiflow-etch check PASS (flat Adom.LaserEtch layer, along the pin rows, upright, pin 1 lower left).
