[
  {
    "bodySide": "B",
    "expectedExit": 0,
    "actualExit": 2,
    "stdout": "ERROR: test plan (board): 1 measurements, 0 probe-able, 1 gap(s)\n  probe      TEST         waveform  GAP: every landing on TEST is under a part body (e.g. TP1.1 under U1)\nHint: Each gap needs a spot: move a part off the pad, add a test point on the net (adom/testpoint-pad-0-5mm, schematic first: `step schematic --back --why \"test point for <net>\"`), or widen the copper so a 0.5 mm landing fits. Then `testplan check` again.\n",
    "stderr": ""
  },
  {
    "bodySide": "F",
    "expectedExit": 2,
    "actualExit": 2,
    "stdout": "ERROR: test plan (board): 1 measurements, 0 probe-able, 1 gap(s)\n  probe      TEST         waveform  GAP: every landing on TEST is under a part body (e.g. TP1.1 under U1)\nHint: Each gap needs a spot: move a part off the pad, add a test point on the net (adom/testpoint-pad-0-5mm, schematic first: `step schematic --back --why \"test point for <net>\"`), or widen the copper so a 0.5 mm landing fits. Then `testplan check` again.\n",
    "stderr": ""
  }
]